Known Issues & Solutions

The purpose of this page is to document solutions to various common problems with Holdfast: Nations at War. These are well-established and common problems that players may encounter with the game. As a first port of call, please consult this page before reaching out to Tech Support on the official discord.

Note that this page does not document gameplay bugs. To submit a bug report, please do so via the official Holdfast discord: discord.gg/holdfastgame.

Before Consulting the List Below - Common Solutions and Diagnostics

Whilst most problems seen here have very specific solutions, there are a few agnostic solutions that tend to work for most issues. Give these a try before proceeding to the list below.

Verifying Integrity of Game Files

A large portion of crashes and gameplay bugs can be fixed by verifying the integrity of the game files through Steam. This process validates the presence of all game files on-disk, and will prompt Steam to re-acquire any file that fails validation (i.e. is missing). This is especially useful after updates or file changes, where there is a chance that files may be deleted or become corrupt.

To validate your game files:

1. Right-click on Holdfast: Nations at War in your Steam library and select 'Properties'.
2. On the left side of the pop-up, select 'Local Files'
3. At the bottom, click 'Verify Integrity of Game Files'

Steam will perform the validation process. If Steam reports that any files have failed to validate, these files will automatically be re-downloaded again.

Checking Player log file and F2 Console

When diagnosing an issue, it is useful to check the game's error logging. Tech Support may also ask for these logs to help diagnose issues too.

All non-fatal error messages will be written to the in-game F2 console. At any point the game is launched, press F2 to open the console. Any errors are shown in red. Warnings are shown in yellow, but most times these are normal and can be ignored.

For game crashes, it is not always possible to access the F2 console. In these cases, the offending error will be logged in the Player.log file. Player logs files can be found by navigating to C:\Users\<yourusername>\AppData\LocalLow\Anvil Game Studio\Holdfast NaW on Windows. Inside is a file called 'Player', which records logs for the last game session. These logs are overwritten when a new game session is started.

For any queries, please react out to Tech Support in the official Holdfast Discord: discord.gg/holdfastgame.

Known Issues

Here's a list of known issues within the game which we're already aware of. You can rest assured that we're doing our best to solve them and please do get in touch with us if you ever face any issues whilst playing the game!

Known Issue 1 - Black Screen on Launch (Can Hear Music Playing)

If you launch the game and see a black screen but can still hear the music playing, you should try doing the following.

We're currently awaiting a permanent fix for this problem.

AMD Graphics Card (GPU)

Follow the below instructions:

1. Right click on your desktop and select ‘AMD Radeon Settings’.

   

2. Go to the ‘Display’ tab at the very bottom and underneath your display, locate ‘Scaling Mode’. You should then select ‘Preserve Aspect Ratio’ from the drop-down menu.

   

3. After that is done, you need to go to the ‘Gaming’ tab, locate ‘Holdfast: Nations At War’ and click on it.

   

4. Then make sure that you turn ‘Display Scaling’ to ‘Off’ from the drop-down menu.

   

NVIDIA Graphics Card (GPU)

Follow the below instructions:

1. Right click on your desktop and select ‘NVIDIA Control Panel’ from the drop-down menu.

   

2. Go to ‘Adjust desktop size and position’ from the menu to the left.

   

3. Select ‘No Scaling’ under ‘2. Apply the following settings:’ then make sure to click on the ‘Apply’ button.

   

Thread Reference (Steam Discussion)

Known Issue 2 - Razer Kraken Headsets Not Working

Razer Kraken headsets have a tendency of not working whilst in game. Players reported either not being able to hear any sound or various other issues with 3D VoIP.

Have a look at the instructions below for a possible fix.

Follow the below instructions:

1. Check if you have Razer Synapse installed on your system and if so, un-install the software.
2. Try launching the game again.

If the above doesn't work, try the following:

1. Download and install Razer Synapse from the link below.
   • Download Razer Synapse
2. Uninstall Razer Synapse.
3. Try launching the game again.

Known Issue 3 - Cannot Hear Others Or Speak Through VoIP (Opus.dll & Others)

If you are unable to hear others speaking through VoIP and an error stating that the ‘Opus.dll was not found’ is visible in the F2 console, you are more than likely missing a dependency that is required for the 3D VoIP to function.

You can also find other instructions that may help you solve issues with being unable to hear others or speak through VoIP.

Follow the below instructions:

1. Download and install the redistributable from the link below.
   • Download Redistributable
2. Try launching the game again.

If the above doesn't work, try the following:

1. Close Discord, Team Speak or any other voice chat software.
2. Try launching the game again.

Known Issue 4 - Crash To Desktop (Whilst Playing)

On certain occasions, the game might crash to the desktop which happens more so during a map change. Unfortunately, this is being caused by a bug within the Unity game engine.

We're currently awaiting a permanent fix for this problem. You can try doing the following:

Follow the below instructions:

1. Disable your anti-virus.
2. Uninstall or close other software that you're using to monitor performance or hardware (Riva Tuner, MSI Afterburner, etc.) whilst playing the game.
3. Set your graphics preset to 'Very Low' from the 'Game' options.
4. Close unnecessary programs running in the background (Internet Browsers & Other Software).
5. Disable XMP from your motherboard's BIOS settings.
6. Go to the location where Holdfast: Nations At War is installed (\Steam\steamapps\common\Holdfast Nations At War) > Delete the 'MonoBleedingEdge' folder > Go to Steam > Locate the game 'Holdfast: Nations At War' from your library > Press 'right-click' on the game > Go to 'Properties' > Local Files > Press the 'verify integrity of game files...' button > Restart Steam > Try launching the game again.
7. Set your CPU affinity for the game to Two Cores. You can do this by right-clicking on the 'Holdfast NaW.exe' process in your 'Task Manager', select 'Set Affinity' from the dropdown menu then select 'CPU 0' and 'CPU 1'.

   

If the above doesn't work, try the following:

1. Right click on 'Holdfast: Nations At War' in your Steam library > Select 'Properties' from the drop-down menu > Click on 'Set Launch Options' > Insert the following parameter: -force-feature-level-10-0
2. Try re-launching Holdfast: Nations At War again through Steam.

Known Issue 5 - Cannot See Servers In Lobby

If you cannot see servers in the lobby try doing the following.

Follow the below instructions:

1. Click on the 'Refresh' button that can be found to the bottom left of the server browser a few times.

If the above doesn't work, try the following:

1. Disable your anti-virus if applicable (AVG, Avast, Etc.)
2. Disable your firewall.
3. Disable your VPN if applicable (BullGuard, NordVPN, Express VPN, Etc.).
4. Reset your internet connection.
5. Log out then back in on Steam and try again.

If the above doesn't work, try the following:

If you disabled your VPN (or had it disabled already) for the previous step, try enabling it. Although Holdfast generally doesn't work with VPNs in most cases, in very rare cases this can work.

If the above doesn't work, try the following:

1. Launch the game then open the Lobby by clicking on 'Join Game' from the main menu.
2. Locate the 'Join Other Server' button to the bottom left.

   

3. Select an Official Server from the drop-down menu then click on the 'Connect' button.

   

If the above doesn't work, try the following:

1. Join a server through a friend on Steam by selecting 'Join Game' from the drop-down menu.

If the above doesn't work, try the following:

1. Try using a different internet connection if possible and see if servers appear in the lobby.

Known Issue 6 - Game Crashes On Launch or Stops Responding (Freezes)

If you’re facing issues with the game crashing on launch, you should first try to disable your anti-virus then pre-launch the game with the lowest graphical settings by following the below steps.

Follow the below instructions:

1. Update your GPU (Graphics Card) drivers.
   • We've had several cases of players experiencing crashes due to outdated drivers especially when the device is equipped with an Intel HD (Integrated) GPU.
     • Click here to download and update your Intel HD GPU driver.

If the above doesn't work, try the following:

1. Disable your anti-virus (BullGuard, Avast Etc.)
2. Disable XMP. This may cause severe system instability.
3. Open 'Run' and type in '%appdata%'. This will take you to the AppData folder.

   

4. Navigate to the 'LocalLow' folder > Then to the 'Anvil Game Studio' folder > And you'll eventually find the 'Holdfast NaW' folder.
5. In the 'Holdfast NaW' folder, open the 'HoldfastOptions' files using a text editor such as Notepad.
6. Find 'graphicsLevel', change the value there to '0' and save.

   

7. Try re-launching Holdfast: Nations At War again through Steam.

If the above doesn't work, try the following:

1. Uninstall or close other software that you're using to monitor performance or hardware (Riva Tuner, MSI Afterburner, etc.) whilst playing the game.
   • Please make sure that the process for the software you're using to monitor performance or hardware is not visible in your task manager anymore. With this, you can confirm that the program was properly closed.
2. Try re-launching Holdfast: Nations At War again through Steam.

If the above doesn't work, try the following:

1. Launch the game as an administrator by right clicking directly on 'Holdfast NaW.exe'.
   • Holdfast NaW.exe can be found in your Steam games installation directory. For Example:
     • \Steam\steamapps\common\Holdfast Nations At War

If the above doesn't work, try the following:

1. Go to the location where Holdfast: Nations At War is installed (\Steam\steamapps\common\Holdfast Nations At War) > Delete the 'MonoBleedingEdge' folder > Go to Steam > Locate the game 'Holdfast: Nations At War' from your library > Press 'right-click' on the game > Go to 'Properties' > Local Files > Press the 'verify integrity of game files...' button >
2. Restart Steam.
3. Try re-launching Holdfast: Nations At War again through Steam.

If the above doesn't work, try the following:

1. Right click on the Holdfast NaW icon on your desktop.
2. Select 'Properties' from the drop-down menu.
3. Go to the 'Compatibility' tab.
4. Select the 'Run this program in compatibility mode for:' tick box.
5. Choose 'Windows 7' from the drop-down menu.
6. Press the 'Apply' and then the 'Ok' button at the bottom.
7. Try re-launching Holdfast: Nations At War again from your desktop icon.

NB: Remove the compatibility mode before proceeding to the next step if this doesn't work out.

If the above doesn't work, try the following:

1. Right click on 'Holdfast: Nations At War' in your Steam library > Select 'Properties' from the drop-down menu > Click on 'Set Launch Options' > Insert the following parameter: -force-feature-level-10-0
2. Try re-launching Holdfast: Nations At War again through Steam.

If the above doesn't work, try the following:

1. Right click on 'Holdfast: Nations At War' in your Steam library > Select 'Properties' from the drop-down menu > Click on 'Set Launch Options' > Insert the following parameter: -window-mode exclusive
2. Try re-launching Holdfast: Nations At War again through Steam.

If the above doesn't work, try the following:

1. Disable your anti-virus.
2. Go to your Steam game library > Right click on ‘Holdfast: Nations At War’ > Select Properties > Then click on the ‘Set Launch Options…’ button.

   

3. Input the below argument in the 'Launch Options': -show-screen-selector.

   

4. Launch the game from Steam and select ‘Fastest’ from the Graphics quality settings then click the ‘Play!’ button.

   

Known Issue 7 - Low Framerate (Low End PCs)

Players with low-end hardware will sometimes face issues with framerate. We are also working towards more optimisations in this area. You can follow the below steps for some tips which may help you improve your framerate.

Follow the below instructions:

1. Restart your game if it has been launched for a while.
2. Go to Options > Video > And set the Graphics Preset to 'Very Low' from the drop-down menu.
3. Got to Options > Game > Then scroll down until you find Ragdoll Corpses > Reduce the Maximum Corpses to 5 > And the Second In-Game to 10.

If the above doesn't work, try the following:

1. Right click on 'Holdfast: Nations At War' in your Steam library > Select 'Properties' from the drop-down menu > Click on 'Set Launch Options' > Insert the following parameter: -window-mode exclusive

Known Issue 8 - Game Becomes Unresponsive When Minimized, Screen Flickering or Stuck on Map Load

If your game becomes unresponsive when minimized or your screen is flickering, you can try pre-launching Holdfast: Nations At War with the below parameter.

Follow the below instructions:

1. Right click on 'Holdfast: Nations At War' in your Steam library > Select 'Properties' from the drop-down menu > Click on 'Set Launch Options' > Insert the following parameter: -window-mode exclusive
2. Launch Holdfast: NaW and try again.

Known Issue 9 - No Game Audio

If you cannot hear any audio, you can try doing the following.

Follow the below instructions:

1. Go to Settings > Audio > Then select your 'Audio Device' from the Drop Down menu.
2. You can also try re-installing your Realtek audio drivers. This may fix your issue even if audio is working on other games.

Known Issue 10 - Unable To Spawn or Join Round

If you are unable to spawn or join the round, an anti-virus you have installed on your machine could be preventing you from doing so.

Follow the below instructions:

1. Uninstall your anti-virus software.
2. Verify the integrity of your game files through Steam.
3. Launch the game, join a server and attempt to spawn again.

Known Issue 11 - Citrix Workspaces and Unity Games

Citrix Workspace (https://www.citrix.com/) client has effects on games built using the Unity game engine. As a result, games crash, games don't start, etc and it's sadly not something we can sort.

To identify if it's Citrix causing issues when your game crashes open the player.log (or crash log) and look at the amazing wall of text. If you see the following around the top of the log it's Citrix:

Initialize engine version: <Unity Version No.>
> GfxDevice: creating device client; threaded=1
> Crash!!!
> SymInit: Symbol-SearchPath: ’.;C:\Program Files (x86)\Steam\steamapps\common\Holdfast Nations At War;C:\Program Files (x86)\Steam\steamapps\common\Holdfast Nations At War;C:\Windows;C:\Windows\system32;SRV*C:\websymbols*http://msdl.microsoft.com/download/symbols;', symOptions: 530, UserName: ‘<your username>’

There is a workaround and that is to install Citrix the following way:

1. Uninstall Citrix Workspace.
2. Re-install it from Command Prompt using the following command:

CitrixWorkspaceApp.exe ADDLOCAL=ReceiverInside,ICA_Client,AM,SELFSERVICE,DesktopViewer,Flash,Vd3d,WebHelper,BrowserEngine

Alternatively, you can use the edition of Citrix Workspace in the Windows 10 Store, which lacks the feature that causes this problem in Unity games.

Reference from Paradox Interactive.

Known Issue 12 - Virtual Desktop Issue

Virtual Desktop (https://www.vrdesktop.net/) has a similar issue to Citrix (Known Issue 11).

Known Issue 13 - Cannot Join Modded Server (Steam Workshop)

This issue occurs because Steam fails to connect to the Workshop server and you have mods that require updating or must be downloaded anew.

Follow the below instructions:

1. Log out then back in on Steam.
2. Change to another Steam download region by going to your Steam Settings > Downloads > Select a different region from the dropdown.
3. Ask the administrator of the server for the list of modifications and download them manually from the Steam Workshop.

Known Issue 14 - No Main Menu (Only Background With Cannon/Howitzer)

Doing a PSA regarding possible issues brought up today and easy fixes, we have found for them:

1. If you're launching the game and its crashing or showing you weird things (purple/black/etc) do the following:

- Verify Steam Files (https://help.steampowered.com/en/faqs/view/0C48-FCBD-DA71-93EB)
- Update graphic drivers (depending if nvidia or amd, they have their ways)
- Update windows (https://support.microsoft.com/en-us/windows/update-windows-3c5ae7fc-9fb6-9af1-1984-b5e0412c556a)
- Reinstall directx (https://www.microsoft.com/en-us/download/confirmation.aspx?id=8109)

- Close any performance tool such as NZXT Cam.

2. If you're launching getting to the main menu (with the cannons/howitzers) but you dont see the main menu

 - go to %userprofile%\appdata\locallow\Anvil Game Studio\Holdfast NaW you should find a file called holdfastoptions.ini and either delete it, 
   or use the following one (https://cdn.discordapp.com/attachments/478475816850817024/943979752916680754/HoldfastOptions.ini); Note this is a low preset, so you'll have to go to options and manually fix it. If you can, please send the old/broken holdfastoptions.ini, player.log and player-prev.log to wrexial (me) in dm.

3. If none of the above are the issues go to %userprofile%\appdata\locallow\Anvil Game Studio\Holdfast NaW and check the Player.log and/or Player-prev.log. If at the top it says Version: Direct3D 11.0 [level 10.0]

- go to steam, right click on holdfast, go to "launch parameters" in general and remove anything you have there. Than launch the game again.

4. If all the above fail, check the Wiki FAQ pinned above (we'll be adding these to the wiki soon* )

5. If you're still stuck, feel free to post in tech-support your Player.log and/or Player-prev.log and pc specs.

If you look at the Player.log and see Could not allocate memory: System out of memory! try following the two video guides at the bottom (win10/7) regarding page files https://steamcommunity.com/app/255710/discussions/0/1741101364301107506/

Known Issue 15 - Audio-Related (Mic Not Picked Up)

If for any reason your mic isn't being picked up by the game, you'd have to take a look at your windows audio settings, most probably you've got a few 'dead' audio devices/sources that are interfering which you should be able to 'right-click' -> 'disable' on them. From this panel https://cdn.discordapp.com/attachments/671660988344565792/967469190858567690/unknown.png

If that doesn't work take a look at the Sea of Thieves guides https://support.seaofthieves.com/hc/en-gb/articles/115012749647-Windows-10-Audio-Chat mostly, the Windows 10 Privacy Settings, and the Configure the individual Microphone input for Sea of Thieves sections.

Known Issue 16 - Game Stuck on Map Load

Disable your VPN and you should be good to go.

If that doesn't work out try having a go at disabling your anti-virus.

Known Issue 17 - Reginald 'One Eyed' Fitzgerald head not unlocking

Occasionally the Reginald 'One Eyed' Fitzgerald head will not unlock for the player, even if they are in the official Holdfast Discord. The following steps can be taken to remediate this issue:

• If you are not in the official Holdfast Discord - join the Discord using the in-game join button. Reginald should unlock for you once you return to the game. A refresh (i.e. leaving and re-joining the server) may be needed.
• If you are in the official Holdfast Discord - If the head still doesn't unlock and you are in the server, perform the following steps:
  • Ensure you are using the Discord desktop app - Currently the browser-based web app is not supported. Using this instead of the desktop app will cause issues.
  • Click the in-game join button - Occasionally, clicking on the in-game join button again will work. If you are in the server you do not need to re-join, just clicking through an exiting out should be enough.
  • Ensure you have no other Discord installations - Multiple installations of discord, or different versions such as beta or canary may not be recognised by the game. Uninstall any secondary installations and try again.
  • Ensure you have the Discord desktop app open in the background - As simple as it sounds, make sure discord is actually open.
• If none of the above steps fix the issue: - Check the F2 console while in-game. If you see any red errors related to Discord:
  • Make sure that you run Discord, Holdfast, and Steam as administrator for elevated privileges
  • Very rarely, verifying integrity of game files through Steam may fix the issue
  • If all options have been exhausted, please take a screenshot of the error and contact #tech-support for assistance.

Steam Related Issues

Known Issue 1 - Content File Locked (Corrupted Download)

If the below error is being displayed when you launch the game directly through Steam, it is more than likely that Holdfast: NaW was corrupted whilst downloading.

Follow the below instructions for a fix:

1. Delete Holdfast: NaW manually from its folder (Go to were your Steam games are installed).
2. Uninstall Holdfast: NaW from Steam.
3. Go to your '\AppData\LocalLow\Anvil Game Studio' and delete the 'Anvil Game Studio' folder.
4. Restart your PC.
5. Install the game again.

Known Issue 2 - Game Crashes After Update

If you have successfully launched the game beforehand but the game is now crashing, this is more than likely being caused by one of the game files getting corrupted after the update.

Follow the below instructions:

1. Disable your anti-virus.
2. Delete Holdfast: NaW manually from its folder (Go to were your Steam games are installed).
3. Uninstall Holdfast: NaW from Steam.
4. Go to your '\AppData\LocalLow\Anvil Game Studio' and delete the 'Anvil Game Studio' folder.
5. Restart your PC.
6. Install the game again and try launching it.
7. If it doesn't work, you can try verifying the integrity of your game files by right clicking on 'Holdfast: Nations At War' in your Steam games library > Select Properties > Go to Local Files > Click on 'Verify Integrity of Game Files...' and after the file integrity check is complete, try relaunching the game again.

Known Issue 3 - Black Screen When Launching (Steam Not Initialised)

If you are seeing a black screen when launching the game, Steam didn't properly initialise. It is a required step for Steam to detect that you’re the owner of the game.

Here's a reference of how the black screen looks.

Follow the below instructions:

1. Log out from Steam (By clicking on your name to the top right and selecting ‘Change User..’)
2. Close the Steam application.
3. Open Steam and log in again.
4. Try launching the game again.

If the above doesn't work, try the following:

1. Uninstall Holdfast: Nations At War.
2. Uninstall then reinstall Steam.
3. Launch Steam as an Administrator.
4. Reinstall Holdfast: Nations At War.
5. Verify the integrity of your game files through Steam for 'Holdfast: Nations At War'.
6. Try launching the game again.

Known Issue 4 - Loss of class XP and levels

Occasionally, players can sometimes lose some of all of their earned XP and levels for any class. This is usually caused by Steam erroring when retrieving player data, and can often be solved by a simple restart.

Follow the below instructions:

1. Close Holdfast: Nations at War
2. Restart Steam (fully log out and log back in again, re-opening the Steam client)
3. Re-open Holdfast: Nations at War. Class XP and levels should be restored again.

If the above doesn't work, try the following:

If the above has not worked, please reach out to tech support for assistance.

Known Issue 5 - Permission Denied error in Regiment Registry

Users may encounter an error when attempted to modify their regiment in the registry (for example, modifying ranks or accepting/denying members). This is usually caused by Steam auth returning an error, thus a simple restart should work.

Follow the below instructions:

1. Close Holdfast: Nations at War
2. Restart Steam (fully log out and log back in again, re-opening the Steam client)
3. Re-open Holdfast: Nations at War.

If the above doesn't work, try the following:

Keep restarting your game a few times - sometimes more than one restart is needed.

If the above doesn't work, try the following:

Very rarely, repeated restarts of Steam and Holdfast: Nations at War do not resolve this error. However, it can sometimes take minutes, hours, or even days to work, the reason for which is still under investigation. If you are still having issues, reach out to tech support for further assistance. Leave it for a few hours or days and it should eventually fix itself.

Game Tips

Game Tip 1 - Orbit Camera (Look Around) Not Working

If the 'Orbit Camera' used to look around your character without moving around is not working, try changing the default key to another from the key settings. The default key for the orbit camera is tilde '~'.

Follow the below instructions:

1. Go to 'Settings' > Then navigate to the 'Keys' tab > Change the key for the 'Orbit Camera' to another one.

Game Tip 2 - Left Clicking When Using A Musket From Firing Mode Is Going Into Melee Mode

Within the game, you right click to aim, left click to fire and press 'R' to reload. If you left click when you're in firing mode with a bayonetted musket, it will go automatically into melee mode. You can disable this through the game options.

Follow the below instructions:

1. Go to 'Settings' > Then 'Game' > Look under 'Melee Combat' > And disable 'Auto Bayonet Switch'.

Game Tip 3 - Restrictive Melee Combat When Striking (Turning Rate Too Low)

If melee combat feels restrictive when holding a strike and turning, you should try increasing sensitivity of the 'Melee Combat' sensitivity slider.

Follow the below instructions:

1. Go to 'Settings' > Then 'Game' > Look under 'Mouse Sensitivity' > And increase the 'Melee Combat' sensitivity slider.

Game Tip 4 - Shadowplay Is Not Working

If Nvidia Shadowplay isn't working, you can try pre-launching Holdfast: Nations At War with the below parameter.

Follow the below instructions:

1. Right click on 'Holdfast: Nations At War' in your Steam library > Select 'Properties' from the drop-down menu > Click on 'Set Launch Options' > Insert the following parameter: -window-mode exclusive
2. Launch Holdfast: NaW and try again.

Game Tip 5 - Game Stuttering (V-Sync)

If your game is stuttering even with high framerates. We recommend that you try turning on V-Sync from within the game.

Follow the below instructions:

1. Go to 'Settings' > Then 'Video' > And enable 'VSYNC'.

Server Side Issues

Known Issue 1 - Your Server Is Experiencing Latency Issues

Take note of the following points if the server you are hosting is experiencing latency issues.

The documentation for hosting a server can be found down below.

Host Your Own Game Server! - Documentation

Take note of the following:

1. Make sure that your CPU has a core speed of at least 3.6 GHz and that you’re not exceeding your bandwidth. You should also run your game server on a single physical and logical core.
2. Make sure that your server box's 'Power Options' are set to 'High Performance' on Windows. By default, this is set to 'Balanced'. Please change this!
3. Make sure that you have the latest Windows updates installed on your machine. This is very important.
4. Make sure that you follow the folder structure as defined in the documentation. Copy over the ‘holdfast_naw_public_servers’ folder over to your root drive then include the contents of the game from Steam in the ‘holdfast_naw_public_server’ folder.
5. Make sure that you port forward the game ports from your firewall and router, (outbound and inbound), on UDP.
6. Don’t rename the ‘Holdfast NaW.exe’ executable.
7. Don’t switch between Naval and Army based game modes.